True AC sensing technology With 2 Level indicator of over head tank &Sump Auto cut off during motor dry run Auto/Manual (Rocker Switch) need/ dry run reset (feather touch button). Suitable for mono block motors up to 1hp (single phase)
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
Deluxe-01
Maxtan DLX-01 is usually used for all single phase pumps like mono- block pump, open well pump and compressor pump. Depending on the site condition, this model can be scaled up, to have a current handling capacity of up to 30Amps. DLX-01 cannot be used for Bore-well pumps. DLX-01 is the most popular and fast moving model.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Deluxe-DLX 02
This model is made for Bore well pumps only. This model is specially designed to handle the different current requirement for the starting and the running coils. This is achieved by the use of two relays, each for starting and running dedicatedly. This model is also called as double relay unit. Because of this the Bore well pump and the starter will have a longer life.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Deluxe DLX-03
This model is designed for 3phase (440V) pumps. Bore-well pump, mono block pump, centrifugal pump, compressor pump etc. Up to 40HP pumps can be controlled by this model. Usually used in apartments, industries, government buildings, irrigation purpose, etc. Maxtan DLX-03 is designed to switch off the pump even if only one of the three phases fail. This feature protects the pump from burning, during single phase.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Auto Change Over
Auto Change over model is a combination of DLX-01 and DLX-02. This model is used to switch on the bore well automatically, immediately after the sump tank water is fully consumed. Once the water supply to the sump tank is started, the bore well pump is switched off and the sump tank pump is switched on automatically. This model can be used in places where both the sump tank pump and the bore well pump are single phase pumps.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Manua Change Over
The working of Manual Change Over model is similar to that of Auto change over model. In manual change over model we have to select the pump manually by using the change over switch irrespective of the sump tank water level. The change over does not occur automatically and hence the change over has to be done manually.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Auto Timer Unit
This model is normally used for bore wells having low source where water cannot be pumped continuously for a long time. Depending upon the bore well water source and the water requirement, the timer can switch on or switch off the pump as per the pre set timings. This model is available for both Single phase submersible pumps and three phase submersible pumps.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Double Tank Controller
Double tank controller means two overhead tanks are filled by a common pump. Both the over head tanks will be controlled independently. This feature can be enabled in both single phase and three phase models.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Triple Tank Controller
Triple tank controller means three overhead tanks are filled by a common pump. All the three over head tanks will be controlled independently. This feature can be enabled in both single phase and three phase models.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
Multi Tank Controller
Multi tank controller means more than three overhead tanks are filled by a common pump. All the over head tanks will be controlled independently. Depending upon the site condition this model can be customized for several over head tanks. This feature can be enabled in both single phase and three phase models.
Motor on indication (green)& dry run indication (red)
When water is pumping to over head tank it shows flow indication
Auto cut off if motor Runs dry 120secounds
Indication voltage variation (green indicator for normal voltage red indicator for high & low)
Feather touch button for Auto/manual/need rest
3way switch for By pass option
Fuse option
Suitable for all types three phase motor bore well pumps
General Features
Made from ABS plastic body, double sided PCB, for durability and performance, Maxtan range of products are very rugged. Input voltage is 230 V AC. The working range is up to 200 meters. Overhead tank will have seven sensors and ground level tank will have four sensors.
Dry run protection
Either due to electrical or mechanical fault, if water is not being pumped to the overhead tank dry running of the motor can occur resulting in burning of motor windings. This condition is effectively handled by switching off the pump if water does not flow to the over head tank within 120 seconds.
